TL;DR: Fingerprint Payment Guide Board for Wayfinding Kiosk
AndroidSBC peripheral desk: guide kiosk touch, scanner and printer driver SDK declared production-ready serving The Hague, Netherlands. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to The Hague and Netherlands importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
Supply continuity on the WF-G family is handled the way a venue estate actually consumes boards: a pilot lot first, then a rolling programme. AndroidSBC holds buffer stock on the Rockchip and Allwinner tiers, quotes a 1-3 day sample lead and a 15-30 day mass-production lead, and locks the BOM at the start of each production lot so a Hague programme does not silently change silicon between the pilot and the ramp. For Netherlands buyers running multi-site rollouts the export desk schedules lots against mall opening dates and venue handover milestones, and ships FOB Shenzhen, CIF destination port or DDP, whichever the integrator has credit and customs capacity for. Certification, carton labelling and palletisation for Netherlands are prepared in Shenzhen by the export desk before the Hague shipment leaves, and the test reports stay versioned against the board revision.
WF-G3602 Technical Specifications
| Parameter | AndroidSBC WF-G3602 (wayfinding information kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus eDP | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | -10C to 60C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Netherlands importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Netherlands Buyers
The third obstacle is certification sequencing. Netherlands customs and venue operators ask for different files, and a Hague programme that orders boards before the compliance dossier is assembled ends up storing stock it cannot install.
Fleet management is part of the reference image. The WF-G family ships with staged OTA, rollback, remote configuration and device telemetry hooks, so a Hague rollout in Netherlands can be updated in waves rather than all at once, with AT NL conformity and CE marking with Agentschap Telecom radio interface notification paperwork moving with the lot through Port of Rotterdam. AndroidSBC booked 57000 boards for The Hague and Netherlands on the Rotterdam - Shanghai lane as of September 18, 2026, the 8th release on this programme.
Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards
For Netherlands buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. The Hague integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Certification burden is shaping vendor selection. As Netherlands tightens radio, electrical and accessibility conformity for public-facing terminals, The Hague buyers increasingly score vendors on whether the compliance dossier, the EMC reports and the safety file travel with the lot. IDC notes the same shift in enterprise device procurement, where supply continuity and regulatory readiness now weigh as heavily as unit price in wayfinding information kiosk platform choices.
- Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1330 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G1330 and the industrial WF-G1331 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G1331 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
The number that actually moves a Hague project is not the market total but the board count per venue, and that is where a multi-tier family earns its keep.
Partner Success Story: Southern Cross Venues (stadium and resort venue operator supplier)
A Southern Cross Venues deployment in the Australia stadiums and resorts segment illustrates how the WF-G guide kiosk board family supports The Hague integrators. Southern Cross Venues deployed 57000 WF-G guide boards for stadium concourse directories and resort wayfinding points.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Venues branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus AT NL conformity, all bundled into the Shenzhen source-factory shipment.
Southern Cross Venues Venue Systems Manager for Australia Stadiums and Resorts noted: Southern Cross Venues needed boards that survive a sealed outdoor housing through a Netherlands summer, and the wide-temperature WF-G SKUs held the 57000 screens in The Hague through the full event season without a thermal shutdown.
Field Report: wayfinding kiosk bank installation at a transit interchange
YANTIAN, Shenzhen, September 18, 2026 - Jin Tao, AndroidSBC field desk. The WF-G3602 boards were burned in with the QR scanner, ID card reader and relay modules attached, so the wayfinding information kiosk driver chain was exercised end to end. The WF-G3602 smart guide kiosk Android motherboard order for The Hague, Netherlands cleared the burn-in station on schedule and is en route via the Rotterdam - Shanghai lane.
The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Netherlands integrators, the AT NL conformity plus CE marking with Agentschap Telecom radio interface notification paperwork is bundled.
Filed by Jin Tao, AndroidSBC field desk, YANTIAN, Shenzhen. CE plus AT NL; Rotterdam is the main consolidation hub for European self-checkout rollouts.
WF-G3602 Application Scenarios
The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G6180 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G5270 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G8800 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G8801 plus WF-G6180 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G5270 plus WF-G8801 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G6180 plus WF-G8800 carry the guest orientation flow in The Hague.
- Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G8801 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in The Hague: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for The Hague Buyers
AndroidSBC opens OEM, ODM and distribution tracks on the WF-G family for The Hague and Netherlands, all backed by one Shenzhen production line and one firmware baseline.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
The practical benefit for The Hague and Netherlands is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?
Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with wayfinding information kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: Within the WF-G family, RK3568 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Netherlands?
Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Netherlands AndroidSBC bundles AT NL conformity and CE marking with Agentschap Telecom radio interface notification into the same carton that clears Port of Rotterdam.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: For The Hague and Netherlands buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Netherlands team receives the build tree, not just a binary image.
How are software updates and long-term support handled on the WF-G family?
Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and The Hague integrators choose when to take them.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the AT NL documentation set for Netherlands customs at Port of Rotterdam.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.
Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation
To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, The Hague integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For The Hague and Netherlands the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
